Map of Azaapi in STL format
A map built from OpenStreetMap data, ready to download
Customize the map
Open this place's area in the constructor and adjust everything to your needs
Open in constructor →Map passport
What this map contains by default
This is how the map is built as-is — every setting can be changed in the constructor.
.stl
About STL
Map of Azaapi in STL: 279 buildings — in the WGS 84 coordinate system, units are meters.
Which layers are in the file
This file for the selected area contains:
- Buildings
Geometry by layer
- Buildings — solid volumes extruded from building outlines
What the file carries
The STL file for Azaapi: features come as a single stream, without named layers, OpenStreetMap tags are not kept — geometry and styling remain, object heights are carried.
What this file will not contain
In STL for Azaapi the following will not travel: 24 km of roads, 1 water features, 1 points of interest — the format prints solid volumes extruded from building outlines, and other layers are not part of the model.
File size
The expected size of the STL file for Azaapi is about 45 KB; the exact size depends on the chosen layers and area.
Coordinate systems
WGS 84 (EPSG:4326), selectable in the wizard
Compatibility
Units
Meters (projected in the chosen coordinate system)
| Category | 3D |
| File extension | .stl |
| Tier | Open Beta |
What's in the STL map of Azaapi
279 buildings, 23.6 km of roads, 1 points of interest.
The area covers 2.0 km², with about 141 buildings per km².
Mostly tertiary roads 21.0 km, residential streets 2.6 km.
The map marks 1 water bodies.
3D model with 279 buildings for 3D printing. Each building is a separate volume with height.
How to use STL for Azaapi
- Select the Azaapi map area on the main page
- Choose STL format and configure export settings
- Click Export and wait for processing
- Download the file and use in your application
Programs that open STL
FAQ: STL for Azaapi
Can I 3D-print the map?
Yes! The STL file contains buildings with realistic height proportions. Open in Cura or PrusaSlicer and send to print.
