Export Map for Rhino 3D

NURBS-based 3D modeler. DWG for 2D, OBJ for 3D. Grasshopper parametric.

Best format: DWG
WindowsmacOS

Developer: McNeel · Category: 3D Modeling

Recommended Export Settings

Coordinate SystemAuto UTM (meters)
Unitsmeters

How to import an OpenStreetMap map into Rhino 3D

Rhino reads our DWG as curves on layers — a ready base for Grasshopper scripts, site models and laser cutting. For 3D content use OBJ, glTF or FBX; SVG and Shapefile are available too.

Import steps

  1. On osm2cdr.com find your place by name or draw a rectangle around the area on the map, choose the DWG format and start the export. Download the file when it is ready (unzip it if it arrives as a ZIP archive).
  2. In Rhino choose File → Import (or drag the file into the viewport) and select the .dwg file.
  3. In the DWG/DXF import options set Model units to Meters.
  4. After the import run Zoom Extents (double-click the viewport title → Zoom Extents) to find the map.
  5. Use the Layers panel to lock the map layers before you model on top, or reference them in Grasshopper with Geometry Pipeline.

Coordinate system

By default CAD files are delivered in the UTM zone of the centre of your area: EPSG:326xx in the northern hemisphere, EPSG:327xx in the southern one (for example, central Berlin is UTM zone 33N, EPSG:32633). UTM is a metric, conformal projection, so lengths and areas measured in the drawing match reality within about 0.1 %. You can pick a different coordinate system in the export settings before you start the export.

UTM coordinates are large numbers: eastings are hundreds of thousands of metres and northings are millions of metres. The geometry therefore lies far from the drawing origin — this is expected and keeps the map georeferenced.

If you prefer working near the origin, select everything and Move it by a round offset you note down; distances do not change.

Units

The file is in metres. Use a model template in metres or set Model units to Meters in the import options; Rhino offers to scale if the units differ — choose to keep metres.

Layers

Map objects are split into layers by OpenStreetMap feature type — buildings, roads and paths, railways, water, green areas and land use, labels and so on — and each layer has its own colour, so the drawing reads like the map. Turn layers off, lock or recolour them with the usual tools of the program.

Every CAD layer becomes a Rhino layer with the same name and colour, so you can select all buildings with SelLayer.

FAQ and tips

How do I get buildings in 3D?

Export OBJ or glTF and import that file into Rhino; the DWG remains the best choice for 2D curves.

Can I laser-cut the map?

Yes: the curves are clean polylines on separate layers — keep the layers you want to cut or engrave and delete the rest.

Alternative Formats

OBJ, GLTF, FBX, SVG, SHP

Export DWG Map Now