Download Mafraq map in STL format

A map built from OpenStreetMap data, ready to download

Customize the map

Open this place's area in the constructor and adjust everything to your needs

Open in constructor →

Map passport

Area26 441 km²
Buildings2 264
Roads6 966 km
Points of interest3 447

What this map contains by default

This is how the map is built as-is — every setting can be changed in the constructor.

FormatSTL .stl.zip
LayersRoads, Water, Greenery change
Stylestandard change
Detailoverview (auto) change
House numbersnot visible at this scale change
Points of interestnot visible at this scale change
Coordinate systemWGS 84 (auto) change
Sheet sizeauto change
Relief & gridoff change

About STL

Map of Mafraq in STL — an export of real OpenStreetMap data for the selected area.

Export city buildings to STL format for 3D printing. Buildings are extruded to 3D using height data from OSM tags. The model arrives sized for the print bed: 200 mm along the longest side, with real millimetres inside the file. Binary STL for compact files, ready for slicer import. Delivered as a ZIP: model.stl holds the whole model as one body, the parts folder holds buildings, roads, greenery and the base as separate files in the same coordinates, for multi-colour printing.

Which layers are in the file

The set of layers depends on the selected area.

What this file will not contain

In STL for Mafraq the following will not travel: 6 966 km of roads, 12 water features, 122 548 km² of green areas, 3 447 points of interest — the format prints solid volumes extruded from building outlines, and other layers are not part of the model.

File size

The expected size of the STL file for Mafraq is about 71 KB; the exact size depends on the chosen layers and area.

STL file passport

Estimated from the place's OSM data; exact figures are in the file after the build.

  • Triangles in the model (estimated): ≈ 12
  • Buildings (2 264) are not included in a file at this scale — for 3D houses, order an area smaller than 25 000 km²
  • Model size at 1:5 000: 63 339 × 36 939 mm

Losses: no colour — STL stores triangles only; not in the file: Buildings 2 264.

Build recipe: binary STL: buildings extruded by height or building:levels × 3 m, a base plate under the model; frame 317 × 185 km.

Coordinate systems

WGS 84 (EPSG:4326), selectable in the wizard

Category3D
File extension.stl.zip
TierOpen Beta

How many times STL was built in the last 90 days

Mafraq
0
Jordan
0
Whole site
303
Median file size
1.3 MB
Median build time
3.7 s

Medians are based on all builds on the site

How to use STL for Mafraq

  1. PrusaSlicer or Cura (free) — open the file, fit it to the bed by scaling and slice; supports are usually not needed, the model already stands on a plate.
  2. Blender or MeshLab — look at the model, cut off what you don't need, merge it with other objects before printing.
  3. Mesh checking — run the model through the check in your slicer or in Meshmixer: OSM data contains buildings overlapping each other, which produces self-intersections.

Programs that open STL

CuraPrusaSlicerBlenderMeshLabMeshmixerFusion 360

FAQ: STL for Mafraq

Which layers are included in the 3D model?

Only building geometry. Roads, landuse, water, and boundaries are not included in the 3D scene.

Is terrain relief included?

Yes, where elevation data (DEM) covers the area: buildings sit on the terrain and the top of the base follows the slope. Without DEM the model stands at z = 0. A bare relief surface is the separate Terrain Mesh format.

Can I 3D print this?

Yes, the STL file is ready for import into any slicer (Cura, PrusaSlicer) and 3D printing.

How big is the model?

200 mm along the longest side, which fits the bed of virtually any home printer. The file holds real millimetres, so no manual scaling is needed. The base plate is 2 mm.

Where do building heights come from?

From OSM tags: height, building:levels, or 9m default (3 floors).

Other formats for Mafraq

All 128 formats for Mafraq →

STL for nearby places

Maps other customers made in this format (STL)

Chișinău

0.13 km² · 48 layers

Kamensk-Uralsky

0.67 km² · 55 layers

Masai

0.09 km² · 173 layers

All formats for Mafraq