Download Roura map in STL format

A map built from OpenStreetMap data, ready to download

Customize the map

Open this place's area in the constructor and adjust everything to your needs

Open in constructor →

Map passport

Area3 643 km²
Buildings416
Roads239 km
Points of interest250

What this map contains by default

This is how the map is built as-is — every setting can be changed in the constructor.

FormatSTL .stl.zip
LayersRoads, Buildings, Water, Greenery, Points of interest change
Stylestandard change
Detailauto change
House numbersnot visible at this scale change
Points of interestmajor objects only change
Coordinate systemWGS 84 (auto) change
Sheet sizeauto change
Relief & gridoff change

About STL

Map of Roura in STL: 416 buildings — in the WGS 84 coordinate system, units are meters.

Which layers are in the file

This file for the selected area contains:

What the file carries

The STL file for Roura: features come as a single stream, without named layers, OpenStreetMap tags are not kept — geometry and styling remain, object heights are carried.

What this file will not contain

In STL for Roura the following will not travel: 239 km of roads, 94 water features, 3 874 km² of green areas, 250 points of interest — the format prints solid volumes extruded from building outlines, and other layers are not part of the model.

File size

The expected size of the STL file for Roura is about 69 KB; the exact size depends on the chosen layers and area.

STL file passport

Estimated from the place's OSM data; exact figures are in the file after the build.

  • Triangles in the model (estimated): ≈ 5 004
  • Buildings without height or building:levels: 389 of 416
  • Model size at 1:5 000: 15 419 × 16 839 mm

Losses: 389 buildings without height or building:levels — height by building type (9 m by default); no colour — STL stores triangles only; OSM tags do not go into the model — features: 416.

Build recipe: binary STL: buildings extruded by height or building:levels × 3 m, a base plate under the model; frame 77 × 84 km.

How it is built in the file

The tallest building of Roura among buildings with a footprint over 200 m² in Web Mercator in OSM data is Rue Clusia, 4 (OSM id 202865713): 9.0 m, 3 levels. Its footprint is 368 m². In the STL model the building height comes from the height tag, or else from building:levels at 3 m per level.

Coordinate systems

WGS 84 (EPSG:4326), selectable in the wizard

Category3D
File extension.stl.zip
TierOpen Beta

How many times STL was built in the last 90 days

Roura
0
French Guiana
0
Whole site
292
Median file size
1.4 MB
Median build time
3.9 s

Medians are based on all builds on the site

How to use STL for Roura

  1. PrusaSlicer or Cura (free) — open the file, fit it to the bed by scaling and slice; supports are usually not needed, the model already stands on a plate.
  2. Blender or MeshLab — look at the model, cut off what you don't need, merge it with other objects before printing.
  3. Mesh checking — run the model through the check in your slicer or in Meshmixer: OSM data contains buildings overlapping each other, which produces self-intersections.

Programs that open STL

CuraPrusaSlicerBlenderMeshLabMeshmixerFusion 360

FAQ: STL for Roura

Which layers are included in the 3D model?

Only building geometry. Roads, landuse, water, and boundaries are not included in the 3D scene.

Is terrain relief included?

Yes, where elevation data (DEM) covers the area: buildings sit on the terrain and the top of the base follows the slope. Without DEM the model stands at z = 0. A bare relief surface is the separate Terrain Mesh format.

Can I 3D print this?

Yes, the STL file is ready for import into any slicer (Cura, PrusaSlicer) and 3D printing.

How big is the model?

200 mm along the longest side, which fits the bed of virtually any home printer. The file holds real millimetres, so no manual scaling is needed. The base plate is 2 mm.

Where do building heights come from?

From OSM tags: height, building:levels, or 9m default (3 floors).

Other formats for Roura

All 128 formats for Roura →

STL for nearby places

Maps other customers made in this format (STL)

Chișinău

0.13 km² · 48 layers

Kamensk-Uralsky

0.67 km² · 55 layers

Masai

0.09 km² · 173 layers

All formats for Roura