Map of Slovakia in STL format
A map built from OpenStreetMap data, ready to download
Customize the map
Open this place's area in the constructor and adjust everything to your needs
Open in constructor →Map passport
What this map contains by default
This is how the map is built as-is — every setting can be changed in the constructor.
About STL
Map of Slovakia in STL — an export of real OpenStreetMap data for the selected area.
Export city buildings to STL format for 3D printing. Buildings are extruded to 3D using height data from OSM tags. The model arrives sized for the print bed: 200 mm along the longest side, with real millimetres inside the file. Binary STL for compact files, ready for slicer import.
Which layers are in the file
The set of layers depends on the selected area.
What this file will not contain
In STL for Slovakia the following will not travel: 64 173 km of roads, 5 766 water features, 34 250 km² of green areas, 201 857 points of interest — the format prints solid volumes extruded from building outlines, and other layers are not part of the model.
File size
The expected size of the STL file for Slovakia is about 1.3 MB; the exact size depends on the chosen layers and area.
Coordinate systems
WGS 84 (EPSG:4326), selectable in the wizard
Units
Meters (projected in the chosen coordinate system)
| Category | 3D |
| File extension | .stl |
| Tier | Open Beta |
How to use STL for Slovakia
- PrusaSlicer or Cura (free) — open the file, fit it to the bed by scaling and slice; supports are usually not needed, the model already stands on a plate.
- Blender or MeshLab — look at the model, cut off what you don't need, merge it with other objects before printing.
- Mesh checking — run the model through the check in your slicer or in Meshmixer: OSM data contains buildings overlapping each other, which produces self-intersections.
Programs that open STL
FAQ: STL for Slovakia
Which layers are included in the 3D model?
Only building geometry. Roads, landuse, water, and boundaries are not included in the 3D scene.
Is terrain relief included?
No, buildings sit on a flat base. Surface relief is available in the Terrain Mesh format.
Can I 3D print this?
Yes, the STL file is ready for import into any slicer (Cura, PrusaSlicer) and 3D printing.
How big is the model?
200 mm along the longest side, which fits the bed of virtually any home printer. The file holds real millimetres, so no manual scaling is needed. The base plate is 2 mm.
Where do building heights come from?
From OSM tags: height, building:levels, or 9m default (3 floors).
