PDF/X (ISO 15930, Print-Ready)
Open BetaPDF/X (ISO 15930) és un subconjunt de PDF per a la impressió comercial. Tots els tipus de lletra incrustats, només colors CMYK o de tinta plana, transparència i JavaScript prohibits, i intent de sortida (perfil ICC) obligatori. L'estàndard per a la impressió òfset, les impressores de gran format i la producció d'atles. Garanteix resultats idèntics per a l'autor i la impremta.
Característiques clau
Sobre el format PDF/X
PDF/X (ISO 15930) is the PDF profile for the printing industry. It removes from the file everything that print production stumbles over: fonts must be embedded, the colour space described by an output profile, scripts are forbidden, and the trim and bleed boundaries are set explicitly. Print houses ask for exactly this kind of file, because it prints predictably.
Exporting a map into PDF/X is what you need when the sheet goes not to an office printer but into production: a poster, an atlas spread, a diagram in a magazine, a banner, souvenir goods. An ordinary PDF is sometimes accepted there too, but in prepress it more often needs manual touch-up.
We deliver the PDF/X-3:2003 profile (ISO 15930-3). The map is rendered by the QGIS print layout, then the required markers are added to the file: an output profile with an embedded sRGB ICC profile, the PDF/X version identifier in the metadata, TrimBox and BleedBox frames on every page, the trapping flag and the document title. The PDF version is fixed at 1.4, as this profile requires.
An important detail about colour: PDF/X-3 permits RGB if the working space is set by an embedded profile — and sRGB in our file is exactly that. We do not do automatic conversion to CMYK: it is more correct for the print house to do it for their own press and paper. If your print house has a hard requirement of PDF/X-1a with ready CMYK, ask them to run the conversion with their own profile, or do it yourself in Acrobat Pro or pdfToolbox.
Quin programa obre els fitxers PDF/X
Els programes i les aplicacions següents poden obrir, editar i treballar amb fitxers PDF/X (ISO 15930, Print-Ready) (.pdf) exportats des d'OSM2CDR:
Format specifications
- Open standard
- 2D only
- Lossless (no quality loss)
- No attributes
- Output: 1 file
- PDF/X-3:2003 (ISO 15930-3). Print-production subset of PDF: OutputIntent with an embedded sRGB ICC profile, TrimBox/BleedBox, embedded fonts. No automatic conversion to CMYK.
Qui utilitza els mapes PDF/X
Com exportar PDF/X
Com obrir el fitxer després de l'exportació
- Adobe Acrobat Pro — the Preflight tool with the PDF/X check profile: the report shows that the markers are in place and, if needed, converts the colour to CMYK using the required print profile.
- The print house — when handing the file over, state that it is PDF/X-3 with an embedded sRGB profile; if CMYK for a specific press is required, ask prepress to run the conversion on their side.
- Adobe InDesign or Scribus (free) — place the map in the publication layout and produce the final file already in the PDF/X profile that production asks for.
- Ghostscript or callas pdfToolbox — command-line conversion of colours and profiles, if prepress is automated and there are many files.
- Before the print run — print a proof sheet and look at the thin lines and small labels: on paper they read differently than on screen.
Mapes populars en PDF/X
Obtingues exportacions de mapes PDF/X (ISO 15930, Print-Ready)
Descarrega mapes PDF/X professionals d'OpenStreetMap. Generació instantània, qualsevol àrea.