Download Kitar map in STL format
A map built from OpenStreetMap data, ready to download
Customize the map
Open this place's area in the constructor and adjust everything to your needs
Open in constructor →Map passport
What this map contains by default
This is how the map is built as-is — every setting can be changed in the constructor.
.stlAbout STL
Map of Kitar in STL: 155 buildings — in the WGS 84 coordinate system, units are meters.
Which layers are in the file
This file for the selected area contains:
- Buildings
What the file carries
The STL file for Kitar: features come as a single stream, without named layers, OpenStreetMap tags are not kept — geometry and styling remain, object heights are carried.
What this file will not contain
In STL for Kitar the following will not travel: 2.8 km of roads, 486 km² of green areas — the format prints solid volumes extruded from building outlines, and other layers are not part of the model.
File size
The expected size of the STL file for Kitar is about 38 KB; the exact size depends on the chosen layers and area.
STL file passport
Estimated from the place's OSM data; exact figures are in the file after the build.
- Triangles in the model (estimated): ≈ 1 872
- Model size at 1:5 000: 283 × 281 mm
Losses: no colour — STL stores triangles only; OSM tags do not go into the model — features: 155.
Build recipe: binary STL: buildings extruded by height or building:levels × 3 m, a base plate under the model; frame 1.4 × 1.4 km.
Coordinate systems
WGS 84 (EPSG:4326), selectable in the wizard
| Category | 3D |
| File extension | .stl |
| Tier | Open Beta |
How many times STL was built in the last 90 days
- Kitar
- 0
- Kween
- 0
- Whole site
- 363
- Median file size
- 1.3 MB
- Median build time
- 3.6 s
Medians are based on all builds on the site
How to use STL for Kitar
- PrusaSlicer or Cura (free) — open the file, fit it to the bed by scaling and slice; supports are usually not needed, the model already stands on a plate.
- Blender or MeshLab — look at the model, cut off what you don't need, merge it with other objects before printing.
- Mesh checking — run the model through the check in your slicer or in Meshmixer: OSM data contains buildings overlapping each other, which produces self-intersections.
Programs that open STL
FAQ: STL for Kitar
Which layers are included in the 3D model?
Only building geometry. Roads, landuse, water, and boundaries are not included in the 3D scene.
Is terrain relief included?
No, buildings sit on a flat base. Surface relief is available in the Terrain Mesh format.
Can I 3D print this?
Yes, the STL file is ready for import into any slicer (Cura, PrusaSlicer) and 3D printing.
How big is the model?
200 mm along the longest side, which fits the bed of virtually any home printer. The file holds real millimetres, so no manual scaling is needed. The base plate is 2 mm.
Where do building heights come from?
From OSM tags: height, building:levels, or 9m default (3 floors).
Other formats for Kitar
All 128 formats for Kitar →
STL for nearby places
Maps other customers made in this format (STL)
Родной
★★★★☆
Chișinău
★★★★★
Garrovillas de Alconétar
★★★★★
Its really good man, as a vibe coder myself, I can tell you that the configurator is a bit messy. It's not really easy to configure. There are way too many options. I think you should change it to an advanced mode, or…