Map of Devprayag in STL format
A map built from OpenStreetMap data, ready to download
Customize the map
Open this place's area in the constructor and adjust everything to your needs
Open in constructor →Map passport
What this map contains by default
This is how the map is built as-is — every setting can be changed in the constructor.
About STL
Map of Devprayag in STL: 1 buildings — in the WGS 84 coordinate system, units are meters.
Which layers are in the file
This file for the selected area contains:
- Buildings
Geometry by layer
- Buildings — solid volumes extruded from building outlines
What the file carries
The STL file for Devprayag: features come as a single stream, without named layers, OpenStreetMap tags are not kept — geometry and styling remain, object heights are carried.
What this file will not contain
In STL for Devprayag the following will not travel: 132 km of roads, 4 water features, 1 508 915 km² of green areas, 6 points of interest — the format prints solid volumes extruded from building outlines, and other layers are not part of the model.
File size
The expected size of the STL file for Devprayag is about 45 KB; the exact size depends on the chosen layers and area.
Coordinate systems
WGS 84 (EPSG:4326), selectable in the wizard
Compatibility
Units
Meters (projected in the chosen coordinate system)
| Category | 3D |
| File extension | .stl |
| Tier | Open Beta |
What's in the STL map of Devprayag
1 buildings, 132.3 km of roads, 6 points of interest.
The area covers 512 km², with about 0 buildings per km².
Mostly tertiary roads 43.1 km, secondary roads 37.3 km, unclassified roads 36.3 km.
The map marks 4 water bodies.
Key amenities: universities — 1, bus stations — 1, cafes — 2.
Public transport: 1 bus stops.
3D model with 1 buildings for 3D printing. Each building is a separate volume with height.
How to use STL for Devprayag
- Select the Devprayag map area on the main page
- Choose STL format and configure export settings
- Click Export and wait for processing
- Download the file and use in your application
Programs that open STL
FAQ: STL for Devprayag
Can I 3D-print the map?
Yes! The STL file contains buildings with realistic height proportions. Open in Cura or PrusaSlicer and send to print.
