JEF — Janome Embroidery File
Open BetabetaJEF is the native file format of Janome embroidery machines: a binary file with a 116-byte header (hoop size, thread colors, design bounds) followed by stitch data. On osm2cdr.ru a map turns into embroidery line by line — roads, water outlines, greenery and building contours are traced with a running stitch along the geometry. This is not satin fill but a running-stitch baseline — an honest starting point for a Janome machine or for refinement in an editor. Thread color is assigned per layer using Janome standard palette indices.
Հիմնական հատկություններ
JEF ֆորմատի մասին
JEF is the format of Janome embroidery machines: a binary file holding the design dimensions, the hoop size, the thread palette and the stitch stream itself. The machine reads it from a drive and sews exactly what is written — no interpretation happens on the spot.
A map is embroidered for the sake of an object: a pillowcase with the plan of your own district, a hoodie with the outline of a city, a wall piece as a gift. The geometry of streets and rivers suits this well — it is linear, and a stitch conveys it honestly.
Our export turns the map into a running stitch: road lines and the outlines of water, greenery and buildings are traced with stitching along the geometry. Thread color is assigned by layer type from the Janome palette, long runs are automatically broken into stitches of up to 12.1 mm, and the design is scaled to the chosen hoop with a margin of about five percent.
This is a blank, not a finished industrial design: there are no satin fills, polygons run as an outer outline only, and stitch density is not tuned to a particular fabric. Before serious work it is worth opening the file in an editor, checking the color order and sewing a test on a scrap.
Ո՞ր ծրագիրն է բացում JEF ֆայլերը
Հետևյալ ծրագրերն ու հավելվածները կարող են բացել, խմբագրել և աշխատել OSM2CDR-ից արտահանված JEF — Janome Embroidery File (.jef) ֆայլերի հետ՝
Format specifications
- Proprietary format
- 2D only
- Lossless (no quality loss)
- No attributes
- Output: 1 file
- A Janome JEF embroidery file: a 116-byte header plus running-stitch data tracing map lines and outlines, per-layer Janome palette colors, segments split at 12.1 mm.
Ո՞վ է օգտագործում JEF քարտեզները
Ինչպես արտահանել JEF
Ինչպես բացել արտահանումից հետո
- A Janome machine (Memory Craft, Skyline, Continental) — write the .jef onto a USB drive and open the design on the machine's screen; check that the dimensions fit the hoop.
- Janome Digitizer — the native editor: editing the color order, adding fills, changing stitch density.
- Inkscape with the Ink/Stitch extension (free) — watch a stitch-out simulation, adjust the stitches and, if you like, re-save into another machine format.
- Embird, Hatch Embroidery, SewWhat-Pro — viewing and editing, if you already have one of these packages.
- A test before the finished item — sew the design on a scrap with the same stabilizer: on a dense map you will see immediately where the stitching lies too tight and pulls the fabric.
Հանրաճանաչ քարտեզներ JEF ֆորմատով
Ստացեք JEF — Janome Embroidery File քարտեզի արտահանումներ
Ներբեռնեք պրոֆեսիոնալ JEF քարտեզներ OpenStreetMap-ից։ Ակնթարթային ստեղծում՝ ցանկացած տարածքի համար։