Map of Kanio in STL format
A map built from OpenStreetMap data, ready to download
Customize the map
Open this place's area in the constructor and adjust everything to your needs
Open in constructor →Map passport
What this map contains by default
This is how the map is built as-is — every setting can be changed in the constructor.
.stl
About STL
Map of Kanio in STL: 459 buildings — in the WGS 84 coordinate system, units are meters.
Which layers are in the file
This file for the selected area contains:
- Buildings
Geometry by layer
- Buildings — solid volumes extruded from building outlines
What the file carries
The STL file for Kanio: features come as a single stream, without named layers, OpenStreetMap tags are not kept — geometry and styling remain, object heights are carried.
What this file will not contain
In STL for Kanio the following will not travel: 16 km of roads, 1 water features, 2 points of interest — the format prints solid volumes extruded from building outlines, and other layers are not part of the model.
File size
The expected size of the STL file for Kanio is about 46 KB; the exact size depends on the chosen layers and area.
Coordinate systems
WGS 84 (EPSG:4326), selectable in the wizard
Compatibility
Units
Meters (projected in the chosen coordinate system)
| Category | 3D |
| File extension | .stl |
| Tier | Open Beta |
What's in the STL map of Kanio
459 buildings, 16.3 km of roads, 2 points of interest.
The area covers 2.0 km², with about 231 buildings per km².
Mostly secondary roads 10.8 km, unclassified roads 5.5 km.
The map marks 1 water bodies.
Key amenities: schools — 1.
3D model with 459 buildings for 3D printing. Each building is a separate volume with height.
How to use STL for Kanio
- Select the Kanio map area on the main page
- Choose STL format and configure export settings
- Click Export and wait for processing
- Download the file and use in your application
Programs that open STL
FAQ: STL for Kanio
Can I 3D-print the map?
Yes! The STL file contains buildings with realistic height proportions. Open in Cura or PrusaSlicer and send to print.
