Kort over Devon i STL-format
Et kort bygget af OpenStreetMap-data, klar til download
Tilpas kortet
Åbn dette steds område i konstruktøren og tilpas alt til dit behov
Åbn i konstruktøren →Kortpas
Hvad dette kort indeholder som standard
Sådan bygges kortet som det er — hver indstilling kan ændres i konstruktøren.
Om STL
Kort over Devon i STL — en eksport af rigtige OpenStreetMap-data for det valgte område.
STL (Standard Tessellation Language) is the standard 3D printing format. Buildings and terrain are exported as a triangulated mesh ready for slicing software. The model arrives sized for the print bed: 200 mm along the longest side, with real millimetres inside the file.
Hvilke lag er i filen
Denne fil indeholder for det valgte område:
- Veje
- Bygninger
- Vand
- Interessepunkter
Koordinatsystemer
WGS 84 (EPSG:4326), kan vælges i guiden
Kompatibilitet
Måleenheder
Meter (projiceret i det valgte koordinatsystem)
| Kategori | 3D |
| Filendelse | .stl |
| Niveau | Gratis |
What's in the STL map of Devon
219 buildings, 21.0 km of roads, 8 points of interest, 1 landmarks.
The area covers 2.0 km², with about 111 buildings per km².
Mostly unclassified roads 6.3 km, primary roads 5.1 km, trunk roads 4.8 km.
The map marks 1 water bodies.
Key amenities: libraries — 1, attractions — 1, hotels — 1.
3D model with 219 buildings for 3D printing. Each building is a separate volume with height.
Main streets: Kothmale Road
Landmarks: St. Clair Falls
Sådan bruger du STL til Devon
- Vælg kortområdet for Devon på hovedsiden
- Vælg formatet STL og konfigurer eksportindstillingerne
- Klik på Eksportér og vent på behandlingen
- Hent filen og brug den i din applikation
Programmer der åbner STL
FAQ: STL til Devon
Kan jeg 3D-printe kortet?
Ja! STL-filen indeholder bygninger med realistiske højdeproportioner. Åbn i Cura eller PrusaSlicer og send til print.
