Map of Bulgaria in STL format
Mapa creat a partir de dades d'OpenStreetMap, a punt per descarregar

Personalitza el mapa
Obre l'àrea d'aquest lloc al constructor i ajusta-ho tot a les teves necessitats
Obre al constructor →Fitxa del mapa
Què conté aquest mapa per defecte
Així es genera el mapa «tal qual» — cada paràmetre es pot canviar al constructor.
.stlSobre STL
Mapa de Bulgaria en format STL — una exportació de dades reals d'OpenStreetMap per a l'àrea seleccionada.
STL (Standard Tessellation Language) is the standard 3D printing format. Buildings and terrain are exported as a triangulated mesh ready for slicing software.
Quines capes conté el fitxer
Per a l'àrea seleccionada, aquest fitxer conté:
- Carreteres
- Edificis
- Aigua
- Zones verdes
- Punts d'interès
Sistemes de coordenades
WGS 84 (EPSG:4326), seleccionable a l'assistent
Compatibilitat
Unitats de mesura
Metres (projecció en el sistema de coordenades triat)
| Categoria | 3D |
| Extensió del fitxer | .stl |
| Nivell | Free |
What's in the STL map of Bulgaria
407,764 buildings (109,090 residential, 5,555 commercial, 8,779 industrial, 615 religious), 112,721.5 km of roads, 81,118 points of interest, 100 landmarks.
The area covers 117,338 km², with about 3 buildings per km².
Mostly residential streets 49,453.0 km, unclassified roads 21,333.5 km, service roads 15,850.2 km.
The map marks 653 parks and 2,780 water bodies.
Key amenities: schools — 2,218, supermarkets — 2,081, convenience stores — 3,232.
Public transport: 7,780 bus stops, 746 tram stops, 47 metro stations, 789 rail stations.
3D model with 407,764 buildings for 3D printing. Each building is a separate volume with height.
Main streets: Христо Ботев, Васил Левски, Иван Вазов, Александър Стамболийски, Стара планина
Landmarks: Национален църковен историко-археологически музей при Св. Синод, Къща-музей "проф. Александър Поплилов", Музей на пчелата, Национална художествена галерия, Археологическа експозиция Антична Сердика
Com utilitzar STL per a Bulgaria
- Selecciona l'àrea del mapa de Bulgaria a la pàgina principal
- Tria el format STL i configura els paràmetres d'exportació
- Fes clic a «Exporta» i espera que acabi el processament
- Descarrega el fitxer a punt i utilitza'l al programa que necessitis
Programes per obrir STL
Preguntes freqüents: STL per a Bulgaria
Puc imprimir el mapa en una impressora 3D?
Sí! El fitxer STL conté edificis amb proporcions d'alçada realistes. Obre'l a Cura o PrusaSlicer i envia'l a imprimir.