萨摩亚地图 STL格式
基于 OpenStreetMap 数据构建的地图，可供下载
自定义地图
在构建器中打开该地点的区域并按需调整
在构建器中打开 →地图档案
关于 STL
萨摩亚 的地图，STL 格式 — 所选区域真实 OpenStreetMap 数据的导出。
STL (Standard Tessellation Language) is the standard 3D printing format. Buildings and terrain are exported as a triangulated mesh ready for slicing software. The model arrives sized for the print bed: 200 mm along the longest side, with real millimetres inside the file.
文件中包含哪些图层
所选区域的该文件包含：
- 道路
- 建筑物
- 水域
- 绿地
- 兴趣点
坐标系
WGS 84 (EPSG:4326)，可在向导中选择
兼容性
单位
米（在所选坐标系中投影）
| 类别 | 3D |
| 文件扩展名 | .stl |
| 级别 | 免费 |
What's in the STL map of 萨摩亚
14,467 buildings (1,794 residential, 152 commercial, 152 industrial, 200 religious), 1,764.6 km of roads, 2,423 points of interest, 50 landmarks.
The area covers 12,891 km², with about 1 buildings per km².
Mostly residential streets 759.1 km, primary roads 432.1 km, service roads 205.3 km.
2.6% of the area is green space.
The map marks 16 parks and 78 water bodies.
Key amenities: schools — 217, supermarkets — 85, convenience stores — 128.
Public transport: 51 bus stops.
3D model with 14,467 buildings for 3D printing. Each building is a separate volume with height.
Main streets: Public Road, South Coast Road, North Coast Road, Main South Coast Road, Main West Coast Road
Landmarks: Museum of Samoa, Museum of Samoa, Robert Louis Stevenson's Museum, German Magiagi Hydro Scheme Building, Robert Louis Stevenson Museum and Botanical Gardens
如何为 萨摩亚 使用 STL
- 在主页选择 萨摩亚 的地图区域
- 选择 STL 格式并配置导出设置
- 点击「导出」并等待处理完成
- 下载生成的文件并在所需程序中使用
可打开 STL 的程序
常见问题：萨摩亚 的 STL
可以用 3D 打印机打印地图吗？
可以！STL 文件包含具有真实高度比例的建筑物。在 Cura 或 PrusaSlicer 中打开并发送打印即可。
