Map of Willunga in STL format
A map built from OpenStreetMap data, ready to download
Customize the map
Open this place's area in the constructor and adjust everything to your needs
Open in constructor →Map passport
What this map contains by default
This is how the map is built as-is — every setting can be changed in the constructor.
About STL
Map of Willunga in STL — an export of real OpenStreetMap data for the selected area.
STL (Standard Tessellation Language) is the standard 3D printing format. Buildings and terrain are exported as a triangulated mesh ready for slicing software.
Which layers are in the file
This file for the selected area contains:
- Roads
- Buildings
- Greenery
- Points of interest
Coordinate systems
WGS 84 (EPSG:4326), selectable in the wizard
Compatibility
Units
Meters (projected in the chosen coordinate system)
| Category | 3D |
| File extension | .stl |
| Tier | Free |
What's in the STL map of Willunga
473 buildings (124 residential, 3 commercial), 57.7 km of roads, 74 points of interest, 4 landmarks.
The area covers 7.5 km², with about 63 buildings per km².
Mostly residential streets 18.4 km, unclassified roads 15.5 km, secondary roads 8.1 km.
100% of the area is green space.
The map marks 1 parks.
Key amenities: pharmacies — 1, marketplaces — 1, museums — 3.
Public transport: 14 bus stops.
3D model with 473 buildings for 3D printing. Each building is a separate volume with height.
Main streets: Old Willunga Hill Road, Main Road, St Johns Terrace, Aldinga Road, St Andrews Terrace
Landmarks: Willunga Courthouse National Trust Museum, James Bassett School-National Trust, Willunga Slate National Trust Museum, Willunga Peacock Farm
How to use STL for Willunga
- Select the Willunga map area on the main page
- Choose STL format and configure export settings
- Click Export and wait for processing
- Download the file and use in your application
Programs that open STL
FAQ: STL for Willunga
Can I 3D-print the map?
Yes! The STL file contains buildings with realistic height proportions. Open in Cura or PrusaSlicer and send to print.
