Map of Borkou in STL format
A map built from OpenStreetMap data, ready to download
Customize the map
Open this place's area in the constructor and adjust everything to your needs
Open in constructor →Map passport
What this map contains by default
This is how the map is built as-is — every setting can be changed in the constructor.
About STL
Map of Borkou in STL — an export of real OpenStreetMap data for the selected area.
STL (Standard Tessellation Language) is the standard 3D printing format. Buildings and terrain are exported as a triangulated mesh ready for slicing software. The model arrives sized for the print bed: 200 mm along the longest side, with real millimetres inside the file.
Which layers are in the file
The set of layers depends on the selected area.
What this file will not contain
In STL for Borkou the following will not travel: 2 376 km of roads, 3 water features, 93 803 km² of green areas, 52 points of interest — the format prints solid volumes extruded from building outlines, and other layers are not part of the model.
File size
The expected size of the STL file for Borkou is about 40 KB; the exact size depends on the chosen layers and area.
Coordinate systems
WGS 84 (EPSG:4326), selectable in the wizard
Compatibility
Units
Meters (projected in the chosen coordinate system)
| Category | 3D |
| File extension | .stl |
| Tier | Free |
What's in Borkou
9,578 buildings (13 residential, 2 religious), 2,375.7 km of roads, 52 points of interest, 6 landmarks.
The area covers 150,526 km², with about 0 buildings per km².
Mostly secondary roads 974.3 km, unclassified roads 903.2 km, tertiary roads 446.2 km.
41.8% of the area is green space.
The map marks 3 water bodies.
Key amenities: colleges — 2, schools — 7, hospitals — 3.
Public transport: 1 bus stops.
Main streets: Chari Chifini شارع شيفيني
Landmarks: Stade municipal Hussein Habre, Rond point Chifini, Rond point, Église Évangélique, كنيسة كاثوليكية
How to use STL for Borkou
- Select the Borkou map area on the main page
- Choose STL format and configure export settings
- Click Export and wait for processing
- Download the file and use in your application
Programs that open STL
FAQ: STL for Borkou
Can I 3D-print the map?
Yes! The STL file contains buildings with realistic height proportions. Open in Cura or PrusaSlicer and send to print.
