Map of St John in STL format
A map built from OpenStreetMap data, ready to download
Customize the map
Open this place's area in the constructor and adjust everything to your needs
Open in constructor →Map passport
What this map contains by default
This is how the map is built as-is — every setting can be changed in the constructor.
.stl
About STL
Map of St John in STL — an export of real OpenStreetMap data for the selected area.
STL (Standard Tessellation Language) is the standard 3D printing format. Buildings and terrain are exported as a triangulated mesh ready for slicing software.
Which layers are in the file
This file for the selected area contains:
- Roads
- Buildings
- Water
- Greenery
- Points of interest
Coordinate systems
WGS 84 (EPSG:4326), selectable in the wizard
Compatibility
Units
Meters (projected in the chosen coordinate system)
| Category | 3D |
| File extension | .stl |
| Tier | Free |
What's in the STL map of St John
307 buildings (214 residential, 1 commercial, 25 industrial, 1 religious), 46.0 km of roads, 110 points of interest, 6 landmarks.
The area covers 7.6 km², with about 41 buildings per km².
Mostly service roads 12.1 km, unclassified roads 8.6 km, secondary roads 8.2 km.
45.8% of the area is green space.
The map marks 1 parks and 1 water bodies.
Key amenities: doctors — 1, convenience stores — 2, town halls — 2.
Public transport: 16 bus stops.
3D model with 307 buildings for 3D printing. Each building is a separate volume with height.
Main streets: Route du Nord, Les Chenolles, Route de Mont Mado, Route des Issues, Route de St Jean
Landmarks: Ronez Point, St.J Millennium Cross, WWI, St John's Manor, La Hougue Boete (mound)
How to use STL for St John
- Select the St John map area on the main page
- Choose STL format and configure export settings
- Click Export and wait for processing
- Download the file and use in your application
Programs that open STL
FAQ: STL for St John
Can I 3D-print the map?
Yes! The STL file contains buildings with realistic height proportions. Open in Cura or PrusaSlicer and send to print.
