Map of Donga Department in STL format
A map built from OpenStreetMap data, ready to download
Customize the map
Open this place's area in the constructor and adjust everything to your needs
Open in constructor →Map passport
What this map contains by default
This is how the map is built as-is — every setting can be changed in the constructor.
About STL
Map of Donga Department in STL — an export of real OpenStreetMap data for the selected area.
STL (Standard Tessellation Language) is the standard 3D printing format. Buildings and terrain are exported as a triangulated mesh ready for slicing software.
Which layers are in the file
This file for the selected area contains:
- Roads
- Buildings
- Water
- Greenery
- Points of interest
Coordinate systems
WGS 84 (EPSG:4326), selectable in the wizard
Compatibility
Units
Meters (projected in the chosen coordinate system)
| Category | 3D |
| File extension | .stl |
| Tier | Free |
What's in the STL map of Donga Department
42,957 buildings (335 residential, 3 commercial, 23 industrial, 3 religious), 3,531.3 km of roads, 111 points of interest, 15 landmarks.
The area covers 10,861 km², with about 4 buildings per km².
Mostly unclassified roads 1,764.8 km, residential streets 675.3 km, tertiary roads 362.7 km.
0.9% of the area is green space.
The map marks 4 water bodies.
Key amenities: schools — 19, pharmacies — 4, marketplaces — 7.
Public transport: 2 bus stops.
3D model with 42,957 buildings for 3D printing. Each building is a separate volume with height.
Main streets: Route de Tchamba, Rue Agoungoulou, Tchamba - Prékété, Rue FOMOTOU, Rue de la Mairie
Landmarks: Palais royal de Djougou, GʊGʊ, GʊGʊ, GʊGʊ, GʊGʊ
How to use STL for Donga Department
- Select the Donga Department map area on the main page
- Choose STL format and configure export settings
- Click Export and wait for processing
- Download the file and use in your application
Programs that open STL
FAQ: STL for Donga Department
Can I 3D-print the map?
Yes! The STL file contains buildings with realistic height proportions. Open in Cura or PrusaSlicer and send to print.
