Kort over Wanguru i STL-format
Et kort bygget af OpenStreetMap-data, klar til download
Tilpas kortet
Åbn dette steds område i konstruktøren og tilpas alt til dit behov
Åbn i konstruktøren →Kortpas
Hvad dette kort indeholder som standard
Sådan bygges kortet som det er — hver indstilling kan ændres i konstruktøren.
Om STL
Kort over Wanguru i STL — en eksport af rigtige OpenStreetMap-data for det valgte område.
STL (Standard Tessellation Language) is the standard 3D printing format. Buildings and terrain are exported as a triangulated mesh ready for slicing software. The model arrives sized for the print bed: 200 mm along the longest side, with real millimetres inside the file.
Hvilke lag er i filen
Denne fil indeholder for det valgte område:
- Veje
- Bygninger
- Vand
- Interessepunkter
Koordinatsystemer
WGS 84 (EPSG:4326), kan vælges i guiden
Kompatibilitet
Måleenheder
Meter (projiceret i det valgte koordinatsystem)
| Kategori | 3D |
| Filendelse | .stl |
| Niveau | Gratis |
What's in the STL map of Wanguru
599 buildings, 24.7 km of roads, 6 points of interest.
The area covers 2.0 km², with about 302 buildings per km².
Mostly unclassified roads 10.9 km, secondary roads 10.5 km, tertiary roads 3.3 km.
The map marks 1 water bodies.
3D model with 599 buildings for 3D printing. Each building is a separate volume with height.
Main streets: Yumbe Road
Sådan bruger du STL til Wanguru
- Vælg kortområdet for Wanguru på hovedsiden
- Vælg formatet STL og konfigurer eksportindstillingerne
- Klik på Eksportér og vent på behandlingen
- Hent filen og brug den i din applikation
Programmer der åbner STL
FAQ: STL til Wanguru
Kan jeg 3D-printe kortet?
Ja! STL-filen indeholder bygninger med realistiske højdeproportioner. Åbn i Cura eller PrusaSlicer og send til print.
